SKYRC MC3000 Universal battery charger & analyser

Availablity:

Beschikbaar via nabestelling


SKYRC MC3000 Universal battery charger & analyser

135,00

Beschikbaar via nabestelling

SKYRC MC3000 Universal battery charger & analyser

Ref: SKY100083

The World’s Most Joyful Round Battery Charger
The creation of this product arose from the desire to finally have a charger as versatile, accurate and powerful as a SkyRC hobby charger but tailored to a sweet battery tray for cylindrical single cell batteries; no more hassle with battery holders, fiddly wiring, clamps or similar DIY solutions.

Accus NiMH, NiCd, NiZn, Eneloop

  • Charge current: Max. 3A (x4 slots)
  • Discharge current: Max. 2A (x4 slots)
  • Internal Accuracy** (calibrated w/ accurate calibration source)
    • Voltage: < |±2mV|
    • Current: < |±2mA|

Accus Lithium-Ion, LiIo4.35, LiFePO4

  • Charge current: Max. 3A (x4 slots)
  • Discharge current: Max. 2A (x1 slot)
  • Max. 1A (x4 slots)
  • Display Resolution
    • Voltage: 0.01V
    • Current: 0.01A

Effective Cooling
The built-in aluminum cooler effectively dissipates heat generated in the inside of the charger to the environment, even at slow fan speed.

Compact Display
The 128×64 pixels screen shows 5 different views during operation, see above a picture of Total Overview (TOV).

Rich User Interface
Eight Buttons for easy programming and operation. Four Slot Number Buttons (SNB) help to address the different slots. The other four buttons are for programming and operation.

Easy Programmability
In Simple and Advanced Ul modes, the charger operates off 30 user-defined operation profiles. The programs can be called up and run with few clicks, very conveniently.

Secure Stand
Rubber feet and strong tilt stand elements provide a firm stand. Tilted position enhances viewing angle and cooling air flow at the bottom side.

No-nonsense Modes
There are total 6 operation modes (‘Breakjn’ for NiMH/NiCd/Eneloop batteries only, ‘Storage’ for Li-Chemistry batteries only).

  • Charge : Charge the battery at the selected rate. Suitable for frequently used batteries.
  • Discharge : Discharge the batteries at the selected rate.
  • Refresh Analyse : Suitable for batteries stored for more than two weeks but less than 3 months or the batteries showing poor performance. This mode can also determine the battery capacity for battery matching.
  • Breaking : Battery forming is a charge-discharge-charge cycle which forces a full charge into the new batteries and those stored for more than 3 months at a very low rate to activate the batteries.
  • Cycle : Performs charge-dicharge cycle for up to 99 times. Cycle mode can remove memory effect of rechargeable batteries.
  • Storage : Charge/Discharge a lithium battery to a voltage which is, theoretically, better for storing a long time while maintaining the maximum of its lifespan.

APP Control
BLE 4.0 technique enables user to operate the charger and view real time data and graphs via mobile application.

PC Control
User can use PC Link software to control the charger, view real time data with graphs, and also update the charger firmware through it.